FOX RX+ Micron 3 Rod Presentation Set

FOX RX + Micron 3 Rod Presentation Set

- Weatherproof sealed housing
- Digital circuits
- D-Tec detection system ™ Plus (DTSS)
- Low battery drain
- CNC machined Tru-Run ™ roller wheel
- Dual multi-color LEDs (red, green, blue, orange, purple and white)
- On / off switch with 2 operating modes (day and night mode)
- In night mode, both LEDs will shine subtly in the color of your choice
- High quality cone speaker
- Rigid 3/8 "thread made of steel steel
- Rod-friendly rubber inserts
- Indexed ergonomic volume control (8 different volume levels with lowest setting being completely silent)
- Indexed ergonomic tone control (8 different tone settings: rotate knob clockwise to raise the tone and counterclockwise to lower the tone)
- Indexed ergonomic controls for intelligent sensitivity with swing elimination (8 different sensitivity settings - see below Sensitivity table for comparison with NTX -R)
- The range test function allows the user to check if the receiver RX + raises the RX + head in any range
- Low battery warning (the LED color changes to cyan, indicating that the time no batteries)
- Output socket (2.5mm) for use with illuminated swingers
- Comes with two compression pad options: rigid and soft with extra spare soft pad per piece
- Requires 2 AA batteries
- Single RX + heads, RX + receiver, presentation sets for 2 and 4 rods also available separately

Improved functions compared to NTX-R

- Deeper ears without alarm height increase
- Dual multi-color LEDs, one for ear and top ear
- External multi-color LED control with Color Sync ™ - just change the LED color behind button on the battery cover
- Manually selectable day and night modes
- External control of adjustable Vari-Bright LED brightness to suit the conditions in which you fish (3 selectable LED brightness settings in day mode and 3 different brightness settings in night mode) simply adjust with button on the battery cover
- Greater clearance around the roller and improved drainage significantly reduce the risk of roller freezing in extremely low temperatures
- Greater range performance thanks to RX + receiver
- Improved sensitivity range (see below)

Sensitivity control

In all sensitivity settings (except maximum), the line must travel a certain distance in the same direction and within 2 seconds to trigger the device. Any movement in the opposite direction will reset the distance counter. This can significantly reduce or eliminate false triggering caused by wind and water movement.

Line Movement RX + Line Movement NTX-R

Setting 1 (Min) 90mm 74mm

Setting 2 73mm 56mm

Setting 3 56mm 48mm

Setting 4 34mm 40mm

Setting 5 17mm 32mm

Setting 6 11mm 24mm

Setting 7 5.6mm 16mm

Setting 8 (Max) 2.8mm 8mm

RX + features

- Ultra-long range ™
- Digital circuits
- Low battery drain
- Battery status indicator with receiver turned on (4 x green LEDs indicate full / near full, 3 x green LEDs indicate batteries are in use but do not need replacement, 2 x orange LEDs indicate low battery, 1 x red LED indicates low battery and requires replacement)
- Low battery warning (LEDs will periodically flash blue to indicate batteries need replacement)
- Low battery warning (when RX + head changes for low battery warning, same will be with receiver for that particular alarm, turning cyan again)
- Vibrating alert function (via switch on the back)
- Tent lighting function (via switch on the back) see below for more details)
- Anti-theft alarm < br /> - Easy RX + Micron registration (via switch on the back)
- LED indicators with Color Sync ™
- On / off and volume control
- High quality cone speaker
- Lanyard attachment point
- Requires 3 AA batteries

Improved functionality over NTX-R receiver

- Larger LED indicator windows, visible both on the front and top of the receiver
- Optional tent lighting function after receiving the billet
- Free standing structure to be placed on the tent table / bucket lid
- Soft case with handle
- Ability to sync up to eight RX + Micron heads
- Stronger radio performance
- Silent power on mode, full receiver function but no sound output

Tent lighting function < / p>

When the tent lighting function is turned on with the switch on the back of the receiver, it will behave as follows:

- Signal lights n and the receiver will be slightly dimmed so that the receiver does not emit too much light when the tent lighting is active
- The light in the tent will only turn on when the three bite signals are picked up quickly to prevent false readings and unnecessary switching on of the light in the tent. tent
- The light in the tent will turn off to full brightness and will remain on while the alarm continues to send triggers to the receiver. The light will turn off to zero within 5 seconds after the trigger lights on the receiver turn off, provided no signals are received